1. Qualified installation
Installation must be performed by personnel competent for the work being performed and in compliance with applicable electrical, building, fire, low-voltage, workplace-safety, and local codes. Work requiring a license must be performed by an appropriately licensed person.
Customer is responsible for verifying that the installation location, branch circuit, grounding, cabling, rack, ventilation, and connected equipment are suitable for the WANTRIVO device.
2. Electrical power
- Use only power supplies, cables, batteries, and accessories approved or specified for the WANTRIVO model.
- Do not exceed rated input, output, relay, outlet, current, temperature, or environmental limits shown on the product label or documentation.
- Do not operate damaged equipment, damaged power cords, swollen or damaged batteries, or equipment exposed to water, fire, or severe surge events.
- Disconnect power before servicing where instructed. Do not open or modify the enclosure unless documentation expressly permits it and the person performing the work is qualified.
3. Environment and ventilation
Unless a specific model is expressly rated otherwise, install WANTRIVO in a dry, indoor, controlled environment with adequate ventilation. Keep vents clear and maintain the required clearance from heat sources, liquids, conductive debris, combustible materials, and conditions outside the documented temperature and humidity range.
4. Remote power and reboot controls
WANTRIVO may remotely interrupt power to connected modem or network equipment when an authorized user issues a reboot or power-control command. Customer must ensure that equipment connected to a controllable outlet can be safely power-cycled and that interruption will not create a safety hazard, data-loss hazard, prohibited service interruption, or damage to third-party equipment.
Never connect medical, life-safety, emergency, industrial-control, security-critical, or other equipment that must not be unexpectedly de-energized to a WANTRIVO-controlled outlet unless WANTRIVO expressly approves the application in writing and all required engineering safeguards are implemented.
5. Battery safety
Where a WANTRIVO model contains a battery, follow the model-specific charging, storage, replacement, disposal, and transportation instructions. Do not puncture, crush, short, incinerate, open, or use a visibly damaged battery. Battery runtime and capacity vary with age, temperature, load, cellular use, and other conditions and are not guaranteed unless expressly stated.
6. Network change precautions
Changes to WAN, LAN, DHCP, DNS, routing, firewall, VLAN, modem, and failover settings can interrupt service or make a site unreachable. Maintain appropriate backups, out-of-band access, local recovery procedures, and documented rollback information before applying material network changes.
7. Not for emergency or life-safety reliance
DO NOT RELY ON WANTRIVO AS THE SOLE MEANS OF INTERNET ACCESS, EMERGENCY COMMUNICATION, ALARM TRANSMISSION, POWER CONTINUITY, LIFE-SAFETY MONITORING, OR BUSINESS CONTINUITY. MAINTAIN INDEPENDENT BACKUP AND EMERGENCY SYSTEMS APPROPRIATE TO YOUR OPERATIONS.
8. Stop use after abnormal conditions
Disconnect and stop using the device if there is smoke, unusual odor, abnormal heat, liquid intrusion, enclosure deformation, repeated electrical tripping, battery swelling, or other evidence of unsafe operation. Contact WANTRIVO through its published support channel before returning the unit to service.